Header artwork

Homepage button

Frame page link


Fork page link


Fender page link


Engine page link


Gallery page link


Comments button





DIY page










Brake assembly (Photo 1)

The drum brake assembly removed. The stub axle and bearing assemblies are ready for dismantling, then checked and cleaned or replaced if necessary.

Stub Axle (Photo 2)

The stub axle has been stripped, cleaned and new seals fitted and new bearings installed and greased. The assembly is now ready for the brake mounting plate.

Backing plate (Photo 3)

One of the custom mounting plates fitted and ready for the callipers.

Brake drum (Photo 4)

Test fitting the modified VW brake drum and spacers.

Disc and callipers (Photo 5)

The brake assembly with brake discs and callipers. Beautiful!  The wheel studs haven't been set.

Brake assembly (Photo 6)

The completed brake assembly. All the brake callipers have been refurbished, new pads fitted and new brake hoses made to order.

Trike hanging pedal system (Photo 7)

A VW trike hanging pedal assembly.

Brake cylinder (Photo 8)

Master brake cylinder mounted into the trike frame.

Hand brake lever (Photo 9)

Hand brake lever has been fitted.